There's a version of grease trap cleaning that a lot of commercial kitchens in Nambe have received without knowing it was incomplete: the truck arrives, the pump runs for a few minutes, and the driver leaves. The drain runs clear. The receipt says "cleaned." And nothing else gets checked.
Grease Service MS doesn't operate that way.
Professional grease trap cleaning for a commercial kitchen means pumping the full contents, high-pressure washing the interior, inspecting the baffles and all connected components, testing flow through the system, and producing documentation that reflects what the trap looks like now — not just what went into the truck.
The difference matters operationally. It matters during inspections. And it matters for the lifespan of the trap itself.
What Grease Service MS Cleaning Covers
Deep Grease Trap Cleaning and Degreasing
After the trap is pumped, our technicians perform a high-pressure interior wash — removing residual grease film from trap walls, baffle housing, and outlet chamber. This prevents fast reaccumulation and reduces odor.
Baffle Cleaning and Condition Assessment
Baffles are cleaned and thoroughly inspected at every visit. We document their condition and schedule replacement proactively when needed.
Inlet and Outlet Pipe Cleaning
Grease buildup at inlet and outlet connections is cleaned and cleared. Any narrowing or obstruction is documented in your post-service report.
Odor Control and Deodorization
Deodorization treatment is applied after the source of odor is removed. Persistent odor after cleaning is flagged as a potential structural issue.
Post-Cleaning System Flow Check
We run a flow test to ensure water moves correctly through the entire system, catching restricted outlets or misaligned baffles before they cause problems.
Compliance Reporting for Health Regulations
Every service includes a waste manifest, detailed field report with trap condition notes, and recommended next service date — fully compliant with Nambe, NM regulations.
What Incomplete Cleaning Creates Downstream
Residual grease film accelerates oxidation. Proper interior cleaning significantly extends trap lifespan.
A trap that was only pumped still carries grease film that decomposes and produces odor.
Uninspected baffles can fail, allowing grease to bypass the trap entirely — creating regulatory issues.
A simple receipt is not enough. Inspectors need detailed condition notes and waste volumes.
🧩 How Grease Trap Cleaning Connects to Your Broader Compliance Program
Grease trap cleaning doesn't exist in isolation. It connects to your health inspection record, your sewer authority compliance status, and the condition of every drain line between your kitchen and the trap.
Grease Service MS cleaning services are designed to address the trap as part of a connected system, not as an isolated component. The flow check, drain line assessment, and structured documentation are what connect your trap's condition to your kitchen's overall operational health.
🔍 The Grease Service MS Cleaning Difference
Most grease trap cleaning services in Nambe, NM are structured around speed — in, pumped, out, next job. Grease Service MS is structured around completeness.
Our technicians follow a documented service protocol at every visit that specifies what gets measured, inspected, cleaned, and documented. For operators in Nambe who have faced inspections, the difference between a documented protocol and a simple receipt is crystal clear.
Frequently Asked Questions
How long does a professional grease trap cleaning take? ↓
For standard under-sink passive traps, a full cleaning typically takes 45 to 90 minutes. Larger interceptors or units in poor condition take longer.
How is grease trap cleaning different from just having it pumped? ↓
Pumping removes the contents. Cleaning removes the contents, washes the interior, inspects components, tests flow, and produces full documentation.
Should I be present during the cleaning service? ↓
You don't need to be, but having someone available to confirm access and receive the field report is helpful, especially for first-time services.
My trap was cleaned six months ago and there's already a significant odor. What does that mean? ↓
It usually indicates an incomplete prior clean, a failing baffle, or a service interval too long for your kitchen's grease output.
What Nambe Clients Are Saying
"Baffle was corroded... interior walls had never been washed, just pumped. They replaced the baffle and did a complete clean. The difference was immediate."
Olivia D.
Kitchen Manager, Full-Service Diner
"Persistent odor was killing us... Grease Service MS did a full clean and the odor was gone within 48 hours."
Marcus R.
Owner, Caribbean Restaurant
"Grease Service MS standardized the cleaning protocol across all six locations and gave us a consolidated compliance report."
Theresa N.
Facilities Coordinator, University Dining
What Complete Grease Trap Cleaning Actually Looks Like
If your current cleaning service doesn't include an interior wash, baffle inspection, flow check, and detailed documentation — you're not getting a complete clean.
Click Here to Call (888) 435-1815Schedule Your Grease Trap Cleaning in Nambe